Iron Warriors. Horus Heresy. Kratos. Part1.

So I got a Kratos in the big Horus Heresy release. And I just now got the time to start working on all the new shiny kits. First up is the Kratos assault tank.

Over the years my Iron Warriors paint scheme have become more and more elaborate. What was once something quick and easy to paint up have slowly become a long process.

With this new edition my intention is to get back into a easier process. Hopefully adopting the best of my explorations.

After building the model I primed it black. Then I Zenithal sprayed Leadbelcher from above.

Once dried I take a very light silver and sponge in the surface highlights. The reason for this is that it gives good control and you can introduce some textures on the otherwise flat and empty surfaces.

After this I paint the areas where I want hazard stripes in black and add a matte wash. The reason for this comes later.

The tracks is painted with a mix of black, burnt umber and orange oil paint. This is mixed with a lot of mineral spirits. The consistency is almost as a wash but a little heavier. I dabb paper tissue to remove the exes paint.

Once dried I draw in the highlights with a graphite pencil.

After this I paint the hazard stripes and add decals.

The reason for painting yellow hazard stripes on top a black surface is this. In order to get good coverage I have to do several coats of paint. This is good because I will use a hobby knife to introduce scratches and battle damage. This means that I have a top layer to remove, reveling the black underlaying black. It looks more realistic and is much faster.

Oh I have not put a single layer of varnish on the model, even if I have started to work with oils and mineral spirits.

First off, the silver spray coat already contains more varnish than other acrylics so you already have a protective layer.

Second, just applying mineral spirits and oils will not remove any paint. It is rubbing and punching it around. So apply it, quickly do adjustments and then let it be until it fully dries.

Up to this point, everything have been quick and easy, the longest time is drying times and assemblie.

Mhara gal tainted dreadnought. Word Bearers. Part1.

Next up on the painting table is this lovely model. The mhara gal tainted dreadnought is one of the reasons I started to collect word bearers to begin with.

So far this model have only been painted with oil paints, not counting primer and silver details. I have used oil paint for washing and surface highlights before. But I never tried to paint an entire model from base coat to finish before.

I really like it. It takes a little time, because you need to wait for each layer to dry before continue. But so far it only takes 8-12h which is fine because I only have time to paint on the evenings.

It is very intuitive when you get the hang of it. I can recommend you to try it.

Turnip28. Stump Gun. Part1.

I have had my hands full over the last week. But finally things start to ease up.

I realized that I could have 4 followers units with my 3 commanders in Turnip28. So I felt I had to add one more unit to my force.

I came up with an idea for a Stump Gun and I just had to realize it.

I loosely base the model on a story of a Swedish soldier called Sven Duva that became famous during the battle for Virta bridge 1809.

It is fun to flavor wired fiction with some hints of reality 😁.

Turnip28. Banner. Part1.

Couldn’t help my self. Had to start with the banners for one of the toadys. Had first thought to wait until I had finished the two snobs.

I also came up with an army name for my army.

Karoigler. It is a little play on words. Combining Karoliner (Caroline) and iglar (Swedish for leeches). I thought it was a little clever even if it doesn’t sound as good in English.

The army is roughly based around the Swedish Army in the Napoleonic Wars, or a part of the army at least.

Still have some work to do on the banner. But I think it is shaping up as I want it to.